TM 5-3895-379-23
DATA PLATE AND DECAL REPLACEMENT - CONTINUED
0140 00
DECAL REPLACEMENT
1.
Remove decal (3) from surface of roller.
3
401-680
WARNING
Cleaning compound, solvent MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-
rial. However, it may be irritating to the eyes and skin. The use of protective gloves and goggles is sug-
gested. Use in well-ventilated areas. Keep away from open flames and other sources of ignition.
2.
If necessary, use cleaning compound, solvent to remove all traces of decal and adhesive.
3.
Determine correct location for new decal (3) (TM 5-3895-379-10).
4.
Ensure mounting surface on roller is clean and dry.
NOTE
Careful placement of decal is important. If wrinkles form in decal, instructions may not be legible.
5.
Remove backing paper from decal (3) and press decal into position. Ensure all corners of decal are firmly affixed.
6.
Close right-side door assembly (TM 5-3895-379-10).
7.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0140 00-2
