TM 5-3895-379-23
HYDRAULIC OIL SAMPLING VALVE REPLACEMENT - CONTINUED
0141 00
INSTALLATION
1.
Install new O-ring (11) in tee (5).
2.
Apply sealing compound to threads of tee (5) and install new preformed packing (9) and cap (8) on tee.
3.
Apply sealing compound to threads of tee (5) and install new O-ring (11) and boss reducer (10) on tee (5).
4.
If removed, apply sealing compound to threads of tee (5) and install tee in hydraulic oil pump (7).
5.
Install new O-ring (6) on hydraulic oil sampling valve (2).
NOTE
When installing hydraulic oil sampling valve, position drain down for ease in sample collection.
6.
Apply sealing compound to threads of hydraulic oil sampling valve (2) and position on tee (5). Tighten locking nut (4).
7.
Install hydraulic oil sampling valve drain cap (1) on hydraulic oil sampling valve (2).
8.
Close left-side door assembly (TM 5-3895-379-10).
9.
Fill hydraulic tank (WP 0037 00).
10.
Start engine (TM 5-3895-379-10) and check for leaks.
11.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0141 00-3/(0141 00-4 Blank)
