TM 5-3895-379-23
SEAT BELT AND LANYARD REPLACEMENT - CONTINUED
0136 00
INSTALLATION
1.
If installing new seat belts, punch out month and year
boxes in which you are installing seat belts on punch
PUNCH
card.
CARD
BOXES
401-722
2.
If removed, install two spacers (14), and lanyards (3), on seat assembly (6) with two washers (13) and new locknuts
(12).
3.
Install spacer (4) and right seat belt (7) on seat assembly (6) with screw (11).
4.
Install spacer (4) and lanyard (3) on seat assembly (6) with washer (2), and new locknut (1). Tighten locknut to 55 lb-ft
(75 Nm).
5.
Install spacers (8) and (4), washer (9) and left seat belt (7) with screw (10).
6.
Install L-bracket (5), spacer (4), and lanyard (3), on seat assembly (6) with washer (2) and new locknut (1) on seat
assembly (6). Tighten locknut to 26-40 lb-ft (35-54 Nm).
8
9
4
6
10
7
REAR VIEW OF
SEAT SHOWN
1
2
5
4
3
FOR CLARITY
401-719
7.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0136 00-3/(0136 00-4 Blank)