TM 5-3895-379-23-1
0201
INSTALLATION - Continued
12.
Connect main harness connector to throttle control relay connector (WP 0133).
13.
Connect main harness connector to horn switch connector (WP 0189).
14.
Connect main harness connector to propel speed range switch connector (WP 0161).
15.
Connect main harness connector to starting aid resistor connector (WP 0165).
16.
Connect main harness connector to throttle control relay connector (WP 0133).
17.
Connect main harness connector to hydraulic charge oil pressure connector
(TM 5-3895-379-23P, Figure 63, Item Z).
18.
Connect main harness connector to propel control lever connector (WP 0206).
19.
Connect main harness connector to parking brake switch connector (WP 0156).
20.
Connect main harness connector to backup alarm pressure switch connector (WP 0181).
21.
Connect main harness connector to engine wiring harness connector (WP 0196).
22.
Connect main harness connector to diagnostic warning diode assembly connector
(TM 5-3895-379-23P, Figure 63, Item U).
23.
Connect main harness connector to recording module connector (TM 5-3895-379-23P, Item T).
24.
Connect main harness connector to instrument wiring harness connector (WP 0199).
25.
Connect main harness connector to functional light relay connector (WP 0177).
26.
Connect main harness connector to hydraulic oil temperature relay connector (WP 0185).
27.
Connect main harness connector to warning light relay connector (WP 0180).
28.
Connect main harness connector to water temperature sending unit relay connector (WP 0182).
29.
Connect main harness connector to engine oil pressure switch connector (WP 0172).
30.
Connect main harness connector to turn signal switch connector (TM 5-3895-379-23P, Figure 63, Item L).
31.
Connect main harness connector to resistor fuel solenoid resistor connector (WP 0175).
32.
Connect main harness connector to front/rear pump switch connector (TM 5-3895-379-23, Figure 63, Item J).
33.
Connect main harness connector to auto man switch connector (TM 5-3895-379-23P, Figure 63, Item G).
34.
Connect main harness wire terminals to water spray switch connector (WP 0157).
35.
Connect main harness connector to work light control switch connector (WP 0162).
36.
Connect main harness wire terminals to dual amp switch connector (TM 5-3895-379-23P, Figure 63, Item D).
37.
Connect main harness wire terminals to drum select switch connector
(TM 5-3895-379-23P, Figure 63, Item C).
38.
Connect main harness wire terminals to cutter switch connector (TM 5-3895-379-23P, Figure 63, Item B).
39.
Connect main harness wire terminals to drum offset switch connector
(TM 5-3895-379-23P, Figure 63, Item A).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Turn battery disconnect switch ON. (TM 5-3895-379-10)
2.
Lower operator platform assembly. (Volume 2, WP 0235)
0201-4
03/15/2011Rel(1.8)root(maintwp)wpno(M00139)
