TM 5-3895-379-23-1
0201
REMOVAL - Continued
22.
Disconnect main harness connector from parking brake switch connector (WP 0156).
23.
Disconnect main harness connector from propel control lever connector (WP 0206).
24.
Disconnect main harness connector from hydraulic charge oil pressure connector
(TM 5-3895-379-23P, Figure 63, Item Z).
25.
Disconnect main harness connector from starting aid resistor connector (WP 0165).
26.
Disconnect main harness connector from throttle control relay connector (WP 0133).
27.
Disconnect main harness connector from propel speed range switch connector (WP 0161).
28.
Disconnect main harness connector from horn switch connector (WP 0188).
29.
Disconnect main harness connector from neutral start relay #1 connector
(TM 5-3895-379-23P, Figure 63, Item AE).
30.
Disconnect main harness connector from neutral start relay #2 connector
(TM 5-3895-379-23P, Figure 63, Item AF).
31.
Disconnect main harness connector from brake #1 relay connector (TM 5-3895-379-23P, Figure 63, Item AH).
32.
Disconnect main harness connector from brake #2 relay connector (TM 5-3895-379-23P, Figure 63, Item AG).
33.
Disconnect main harness connector from warning light relay connector
(TM 5-3895-379-23P, Figure 63, Item AJ).
34.
Disconnect main harness wire terminals from intermittent water spray timer connector (WP 0163).
35.
Disconnect main harness wire terminals from flasher connector (TM 5-3895-379-23P, Figure 63, Item AL).
36.
Disconnect main harness wire terminals from main relay connector (WP 0154).
37.
Disconnect main harness connector from throttle control timer connector (WP 0133).
38.
Carefully remove main wiring harness from roller.
END OF TASK
INSTALLATION
NOTE
Install new electrical tiedown straps as necessary.
1.
Position loose wiring harness in general installation position.
2.
Connect main harness wire terminals to throttle control timer connector (WP 0133).
3.
Connect main harness connector to main relay connector (WP 0154).
4.
Connect main harness wire terminals to light circuit breaker connector (WP 0173).
5.
Connect main harness connector to flasher connector (TM 5-3895-379-23P, Figure 63, Item AL).
6.
Connect main harness wire terminals to intermittent water spray timer connector (WP 0163).
7.
Connect main harness connector to warning light relay connector (TM 5-3895-379-23P, Figure 63, Item AJ).
8.
Connect main harness connector to brake #2 relay connector (TM 5-3895-379-23P, Figure 63, Item AG).
9.
Connect main harness connector to brake #1 relay connector (TM 5-3895-379-23P, Figure 63, Item AH).
10.
Connect main harness connector to neutral start relay #2 connector (TM 5-3895-379-23P, Figure 63, Item AF).
11.
Connect main harness connector to neutral start relay #1 connector (TM 5-3895-379-23P, Figure 63, Item AE).
0201-3
03/15/2011Rel(1.8)root(maintwp)wpno(M00139)