TM 5-3895-379-23-1
0143
REMOVAL
NOTE
Inspect hoses, lines, and fittings for cracks, bends, nicks, dents, stripped threads, and cuts.
Replace all damaged parts.
1.
Disconnect connector (Figure 1, Item 6) from temperature sensor connector (Figure 1, Item 5).
2.
Remove temperature sensor (Figure 1, Item 8) and O-ring (Figure 1, Item 9) from thermostat housing assembly
(Figure 1, Item 10).
3.
Remove screw (Figure 1, Item 7) and clip (Figure 1, Item 2) from thermostat housing assembly
(Figure 1, Item 10).
4.
Loosen clamp (Figure 1, Item 12) around hose (Figure 1, Item 11).
5.
Remove two bolts (Figure 1, Item 13) from thermostat housing assembly (Figure 1, Item 10).
6.
Remove three bolts (Figure 1, Item 14) from thermostat housing assembly (Figure 1, Item 10).
7.
Pull thermostat housing assembly (Figure 1, Item 10) away from engine (Figure 1, Item 4).
8.
Slide hose (Figure 1, Item 11) off thermostat housing assembly (Figure 1, Item 10).
CAUTION
Ensure that all O-ring material is removed from thermostat housing assembly and engine.
9.
Remove O-ring (Figure 1, Item 3) from thermostat housing assembly (Figure 1, Item 10). Discard O-ring.
10.
Remove pipe plug (Figure 1, Item 1) from thermostat housing assembly (Figure 1, Item 10).
4
2
1
3
14
6
5
7
8
9
10
13
12
11
M0629SWR
Figure 1. Thermostat Housing Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00081)