TM 5-3895-379-23-1
0134
REMOVAL - Continued
8.
Remove two screws (Figure 4, Item 3), washers (Figure 4, Item 4), clamps (Figure 4, Item 2), cables
(Figure 4, Item 5), and plate assembly (Figure 4, Item 6) from flywheel housing (Figure 4, Item 1).
2
1
3
4
5
2
6
M0610SWR
Figure 4. Muffler and Tailpipe Removal.
END OF TASK
INSTALLATION
1.
Install plate assembly (Figure 5, Item 6), two clamps (Figure 5, Item 2), and cables (Figure 5, Item 5) on flywheel
housing (Figure 5, Item 1) with two washers (Figure 5, Item 4) and screws (Figure 5, Item 3). Tighten screws
to 60-90 lb-ft (81-122 Nm).
2
1
3
4
5
2
6
M1252SWR
Figure 5. Muffler and Tailpipe Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00072)