TM 5-3895-379-23-1
0134
INSTALLATION - Continued
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Failure to follow this warning may cause injury.
5.
Position clamp (Figure 7, Item 3) on top port of muffler (Figure 7, Item 8) and install muffler in tube assembly
(Figure 7, Item 1). Hold muffler in place.
6.
Position clamp (Figure 7, Item 5) over end of muffler (Figure 7, Item 8).
7.
Install clamp (Figure 7, Item 5) on plate assembly (Figure 7, Item 6) with washer (Figure 7, Item 4), screw
(Figure 7, Item 3), washer (Figure 7, Item 4), and nut (Figure 7, Item 7). Tighten nut to 33-47 lb-ft (45-64 Nm).
5
6
4
2
3
1
7
4
8
5
M0612SWR
Figure 7. Muffler and Tailpipe Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00072)
