TM 5-3895-379-23-1
0134
INSTALLATION - Continued
2.
Install bracket (Figure 6, Item 5) on engine (Figure 6, Item 10) with two washers (Figure 6, Item 9) and screws
(Figure 6, Item 8). Tighten screws to 60-90 lb-ft (81-122 Nm).
3.
Install new gasket (Figure 6, Item 1) and tube assembly (Figure 6, Item 7) on turbocharger assembly
(Figure 6, Item 2) three nuts (Figure 6, Item 3). Tighten nuts to 33-47 lb-ft (45-64 Nm)
4.
Install clamp (Figure 6, Item 6) on tube assembly (Figure 6, Item 2) and in bracket (Figure 6, Item 5) with two
nuts (Figure 6, Item 4). Tighten nuts (Figure 6, Item 4) to 203-328 lb-in. (23-37 Nm).
1
2
3
10
9
8
7
4
6
5
M0611SWR
Figure 6.
03/15/2011Rel(1.8)root(maintwp)wpno(M00072)