TM 5-3895-379-23-1
0121
INSTALLATION
NOTE
Apply antiseize compound to threads of studs and screws before installation.
1.
With assistance, install new gasket (Figure 5, Item 4) and turbocharger (Figure 6, Item 1) on exhaust manifold
(Figure 5, Item 3) with four nuts (Figure 5, Item 2). Tighten nuts to 32 lb-ft (44 Nm).
2.
For CB534C Roller only, connect actuator arm (Figure 5, Item 1) to turbocharger and install clip
(Figure 5, Item 7).
3.
With assistance, install turbocharger bracket (Figure 5, Item 5) with three screws (Figure 5, Item 6). Tighten
screws to 22-30 lb-ft (30-41 Nm).
1
2
3
7
4
5
6
M0497SWR
Figure 5.
Turbocharger Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00059)