TM 5-3895-379-23-1
0112
REMOVAL
NOTE
Cap and plug all openings to prevent any contaminants from entering the system.
1.
Place position marks (Figure 1, Item 1) on fuel injection pump.
2.
Disconnect hose (Figure 1, Item 2) from fuel injection pump (Figure 1, Item 5).
3.
Remove three nuts (Figure 1, Item 7) from fuel injection pump (Figure 1, Item 5).
4.
Remove fuel injection pump (Figure 1, Item 5) and gasket (Figure 1, Item 3) from timing case
(Figure 1, Item 4). Discard gasket.
5.
Remove O-ring (Figure 1, Item 6) from fuel injection pump (Figure 1, Item 5). Discard O-ring.
1
2
3
4
5
7
5
2
6
M0142SWR
Figure 1. Fuel Injection Pump Removal.
END OF TASK
INSTALLATION
1.
Lightly apply a coat of clean engine oil to new O-ring (Figure 2, Item 6) and install O-ring on fuel injection pump
(Figure 2, Item 5).
2.
Install new gasket (Figure 2, Item 3) on timing case (Figure 2, Item 4).
3.
Align marks (Figure 2, Item 1) to position fuel injection pump (Figure 2, Item 5).
4.
Install three nuts (Figure 2, Item 7) and fuel injection pump (Figure 2, Item 5) on timing case
(Figure 2, Item 4). Tighten nuts to 192 lb-in. (22 Nm).
5.
Connect hose (Figure 2, Item 2) to fuel injection pump (Figure 2, Item 5).
03/15/2011Rel(1.8)root(maintwp)wpno(M00050)