TM 5-3895-379-23-1
0111
METHOD 1 (TIMING GEAR CASE COVER OFF) INSTALLATION
NOTE
If installing a new gear, check backlash after installation.
1.
Install fuel injection pump gear (Figure 2, Item 3) to fuel injection pump (Figure 2, Item 4).
2.
Install idler gear (WP 0091).
3.
Install nut (Figure 2, Item 1) and spring washer (Figure 2, Item 2) to fuel injection pump gear
(Figure 2, Item 3). Tighten nut to 58 lb-ft (79 Nm).
1
2
3
4
M1255SWR
Figure 2.
Fuel Injection Pump Gear Installation.
NOTE
Be sure not to lose key installed in fuel injection pump shaft.
Turn fuel injection pump gear to align timing marks with idler gear before installation. The
fuel injection pump gear is marked with a "4."
4.
Install timing gear cover (WP 0092).
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00049)