TM 5-3895-379-23-1
0111
METHOD 1 (TIMING GEAR CASE COVER OFF) REMOVAL
NOTE
Idler gear marks may not be in mesh with other three gears due to different speed of
rotation of idler gear.
Turn crankshaft until marks on crankshaft gear, camshaft gear, and fuel pump gear are
in mesh with idler gear.
Be sure not to lose key installed in fuel injection pump shaft.
1.
Remove timing gear case cover (WP 0092).
2.
Remove nut (Figure 1, Item 1) and spring washer (Figure 1, Item 2) from fuel injection pump gear
(Figure 1, Item 3).
3.
Remove idler gear (WP 0091).
4.
With gear puller, remove fuel injection pump gear (Figure 1, Item 3) from fuel injection pump
(Figure 1, Item 4). Check fuel injection pump gear (Figure 1, Item 3) for wear or damage. Replace if necessary.
1
2
3
4
M0139SWR
Figure 1. Fuel Injection Pump Gear Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00049)
