TM 5-3895-382-24
13.
Attach lifting straps and a suitable lifting bracket to
hydraulic oil tank (12) as shown. Remove the hydraulic
oil tank from the machine. The weight of the hydraulic
oil tank is 70 kg (154 lb).
NOTE: For installation of the hydraulic oil tank, reverse
the removal steps.
NOTE: After the hydraulic oil tank has been installed, fill
the hydraulic oil tank to the correct level. See the
Operation & Maintenance Manual for the correct
filling procedure.
Thermal Bypass Valve
Remove & Install Thermal Bypass Valve 5074-010
Start By:
a.
tilt operators platform
At operating temperature, the hydraulic oil tank is hot and
under pressure. Hot oil can cause burns. Remove the fill
cap on the hydraulic oil tank only when the engine is
stopped, and the fill cap is cool enough to touch with your
bare hand.
1.
Release the
pressure
in
the
hydraulic
system
(page 16-11).
2.
Drain the hydraulic oil from the hydraulic oil tank into a
suitable container. The capacity of the hydraulic oil tank
is 72 liters (19 U.S. gal).
3.
Remove two bolts (2), and move vibratory flushing valve
(1) away from the hydraulic oil tank.
16-68