TM 5-3895-382-24
3.
Remove back-up ring (10) and O-ring seals (11) from
check valve (8). Check the back-up ring and O-ring
seals for wear or damage and replace if necessary.
4.
Remove O-ring seals (12) and back-up rings (13) from
the brake valve cartridge and the shift valve cartridge.
Check the O-ring seals and back-up rings for wear or
damage and replace if necessary.
NOTE: For assembly of the brake/shift valve, reverse the
disassembly steps.
End By:
a.
install brake/shift valve
Brake Interlock Valve
Remove & Install Brake Interlock Valve 4265-010
1.
Release
the
pressure
in
the
hydraulic
system
(page 16-11).
2.
Remove the access panel from under the left side of the
operators platform.
3.
Disconnect electrical connector (4) for brake interlock
valve (2).
4.
Disconnect four hose assemblies (3) from the brake
interlock valve. Cap and plug immediately.
5.
Rem ove two bolts (1), and remove brake interlock valve
(2) from the machine.
NOTE: For installation of the brake interlock valve,
reverse the removal steps.
16-71
