TM 5-3895-382-24
35.
Install seven pistons (26) in slipper guide (27). Install
the slipper guide and the pistons in cylinder block (28).
36.
Use Tool (A) to install cylinder block assembly (25) in
the housing.
37.
Install swashplate (24) in the housing as shown.
38.
Install two dowels (37) in the housing. Install new
gasket (39) on the housing.
39.
Install bearing (22) on shaft (21), and install retaining
ring (23).
40.
Install shaft (21) and the bearing in front cover (17), and
install retaining ring (20).
41.
Install two dowels (19) in front cover (17). Apply a light
film of 5P-0960 Multi-Purpose Grease to the inner
faces of each journal bearing to hold them in position.
Install two journal bearings (18) on the front cover and
dowels.
16-63
