TM 5-3895-382-2446. Install caps and fittings (1) in housing (2).End By:a.install drum propel motorVibratory Flushing ValveRemove & Install Vibratory Flushing Valve 5619-010Start By:a.tilt operators platformAt operating temperature, the hydraulic oil tank is hot andunder pressure. Hot oil can cause burns Remove the fillcap on the hydraulic oil tank only when the engine isstopped, and the fill cap is coo enough to touch with yourbare hand.1.Release the pressure in the hydraulic system (page16-11).2.Drain the hydraulic oil from the hydraulic oil tank into asuitable container. The capacity of the hydraulic oil tankis 72 liters (19 U.S. gal).3. Disconnect seven hose assemblies (3) from vibratoryflushing valve (1). Cap and plug immediately.4. Remove two bolts (2), and remove the vibratory flushingvalve from the hydraulic oil tank.16-65
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
