TM 5-3895-382-24
Pump Servo
(7)
Tighten nut to a torque of ..............................18 to 24 Nm
(13 to 18 lb-ft)
(8)
Tighten locknut to a torque of .......................24 to 37 Nm
(18 to 27 lb-ft)
NOTE:
Tighten nut while maintaining location of inside
nut.
(9)
Charge relief valve pressure setting ................. 2825 kPa
(410 psi)
(10)
Main relief valve pressure setting
for CP-433C & CS-433C ..................................29 900 kPa
(4350 psi)
NOTE:
The tandem pump must have pump pressure
synchronization of within 1380 kPa (200 psi).
Pump Mounting Group
(1)
Tighten bolt to a torque of .......................61 Nm (45 lb-ft)
Pump hub mounting dimension (A) .......................63.0 1.0 mm
2.5 0.04 in
10-6
