TM 5-3895-382-24
Cylinder Head - Remove
SMCS Code: 1100-011
Removal Procedure
Start By:
a.
Remove the fuel injection nozzles. Refer to
Disassembly and Assembly, "Fuel Injection Nozzles -
Remove".
b.
Remove the air inlet manifold. Refer to Disassembly
and Assembly, "Air Inlet Manifold - Remove".
c.
Remove the exhaust manifold. Refer to Disassembly
and Assembly, "Exhaust Manifold - Remove and
Install".
d.
Remove the water outlet manifold. Refer to
Disassembly and Assembly, "Water Outlet Manifold -
Remove".
e.
Remove the rocker shaft assembly and the pushrods.
Refer to Disassembly and Assembly, "Rocker Shaft
and Pushrod - Remove".
Illustration 160
Typical example.
Illustration 161
1.
Gradually loosen 22 cylinder head bolts (1) in the
reverse order that is shown above. This will help
prevent distortion of the cylinder head.
Illustration 162
Typical example.
2.
Attach a suitable lifting device to cylinder head (2).
Carefully lift cylinder head (2) off the engine block. The
weight of the cylinder head is 41 kg (90 lb).
NOTICE
Place the cylinder head on a surface that will not scratch
the face of the cylinder head.
7-64