TM 5-3895-382-24
Illustration 84
Typical example
1.
Install engine oil cooler (4) on engine oil filter base (2)
(if equipped).
2.
Place cap (3) on engine oil cooler (4).
3.
Install engine oil filter (1) on engine oil filter base (2).
End By:
a.
Install the engine oil filter base. Refer to Disassembly
and Assembly, "Engine Oil Filter Base - Install".
Engine Oil Filter Base - Install
SMCS Code: 1306-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
Illustration 85
Typical example
1.
Install engine oil filter base (4) on the engine block.
2.
Place the hose clamp in position and install nut (3).
3.
Install three bolts (2).
4.
Connect two hoses and tighten two hose clamps (1).
Engine Oil Relief Valve - Remove and Install
SMCS Code: 1315-010
Removal Procedure
Start By:
a.
Remove the engine oil pan. Refer to Disassembly
and Assembly, "Engine Oil Pan - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
7-37
