TM 5-3895-379-23
PROPEL MOTOR AND TORQUE HUB REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
References
Tools and Special Tools
Tool kit, general mechanic's (Item 36, WP 0220 00)
TM 5-3895-379-23P, Figures 68, 79 and 133
Shop equipment, general purpose (Item 30, WP
Personnel Required
Two
Lifting device, minimum capacity 500 lb (227 kg)
Equipment Condition
Materials/Parts
Lockwasher (24)
Drum assembly removed (WP 0210 00)
REMOVAL
1.
Position drum assembly (1) as shown and use wooden blocks to prevent drum assembly from moving.
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
1
2
Weight of support is 170 lb (77 kg).
2.
Attach lifting device to support (2).
3.
Remove seventeen nuts (3), bolts (4) and support (2)
from propel motor and torque hub (5).
401-971
3,4
