TM 5-3895-379-23
SEPARATE AND CONNECT PROPEL MOTOR AND TORQUE HUB - CONTINUED
0191 00
SEPARATE
1.
Install two link brackets (1) on torque hub (2).
1
2
401-974
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of propel motor and torque hub is 270 lb (122 kg).
2.
Using a lifting strap and hoist, raise and support propel motor (3) and torque hub (2).
NOTE
Use container to catch any oil that may drain from torque hub. Dispose of oil IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
NOTE
3
Weight of propel motor is 55 lb (25 kg).
4
3.
Remove two bolts (4) and, with assistance, remove
propel motor (3) and O-ring (5) from torque hub (2).
2
Discard O-ring.
5
401-975
0191 00-2
