TM 5-3895-379-23
PROPEL MOTOR AND TORQUE HUB REPLACEMENT
0193 00
INSTALLATION
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of drive plate is 230 lb (104 kg).
1.
Attach lifting straps and lifting device to drive plate (6).
2.
Position drive plate (6) on propel motor and torque hub (5) and install ten nuts (9).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of support is 170 lb (77g).
3.
Attach lifting device to support (2).
1
2
4.
Position support (2) on motor and torque hub (5) and
install seventeen bolts (4) and nuts (3).
401-971
3,4
0193 00-3
