TM 5-3895-379-23
PROPEL MOTOR AND TORQUE HUB REPLACEMENT
0193 00
REMOVAL - CONTINUED
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of drive plate, propel motor and
torque hub as a unit is 500 lb (227 kg).
6
4.
Attach lifting device to drive plate (6).
5.
Remove twenty-four bolts (7), washers (8), drive plate
7,8
(6) and propel motor and torque hub (5) as a unit, from
5
mounts.
6.
Position propel motor and torque hub on wooden
blocks.
7.
Attach lifting device to drive plate (6).
401-972
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
6
5
9
Weight of drive plate is 230 lb (104 kg).
8.
Remove ten nuts (9) and drive plate (6) from propel
motor and torque hub (5).
401-973
0193 00-2
