TM 5-3895-379-23
REAR PROPEL MOTOR REPLACEMENT
0192 00
REMOVAL - CONTINUED
1.
Disconnect five hose assemblies (1) from rear propel motor (2).
WARNING
Use caution when lifting heavy parts. Failure to follow this warning may cause injury.
2.
Disconnect propel motor sensor (5).
NOTE
Weight of rear propel motor is 40 lb (18 kg).
3.
Remove two bolts (3), lockwashers (4) and remove rear propel motor (2). Discard lockwashers.
2
1
3,4
1
5
401-661
3,4
1
INSTALLATION
NOTE
Weight of rear propel motor is 40 lb (18 kg).
1.
Position rear propel motor (2) on roller.
2.
Install two new lockwashers (4) and bolts (3).
3.
Connect propel motor sensor (5).
4.
Connect five hydraulic hose assemblies (1) to rear propel motor (2).
5.
Refill hydraulic system (WP 0008 00 and WP 0009 00).
6.
Operate roller and check for proper operation and leaks (TM 5-3895-379-10).
END OF WORK PACKAGE
0192 00-2
