TM 5-3895-379-23
CYLINDER HEAD REPLACEMENT - CONTINUED
0163 00
INSTALLATION - CONTINUED
6.
Tighten all head bolts and nuts in number sequence as follows:
a.
Short bolts (S) 150 degrees further (2.5 flats).
b.
Medium length bolts (M) 180 degrees further (3.0 flats).
c.
Long bolts (L) 210 degrees further (3.5 flats).
7.
Install rocker arm and push rods (WP 0172 00).
8.
Install thermostat housing (WP 0055 00 or WP 0056 00).
9.
Install exhaust manifold (WP 0026 00 or WP 0027 00).
10.
Install intake manifold (WP 0025 00).
11.
Install fuel filter base (WP 0040 00).
12.
Install fuel injector nozzles (WP 0175 00 or WP 0176 00).
13.
Fill radiator (WP 0052 00).
14.
Connect battery cables (WP 0105 00).
15.
Lower operator platform assembly (WP 0128 00).
16.
Start engine and check for leaks and proper operation (TM 5-3895-379-10).
END OF WORK PACKAGE
0163 00-4
