TM 5-3895-379-23
ENGINE OIL PUMP REPLACEMENT - CONTINUED
0164 00
INSTALLATION
CAUTION
Use a feeler gauge to check and insure that there is a minimum of 0.003 inch (0.08 mm) backlash
between engine oil pump gear and idler gear.
1.
Fill engine oil pump (11) with clean engine oil.
2.
Install engine oil pump (11) on engine.
3.
Install two new O-rings (15) on oil tube (14) and connect oil tube (14) to oil relief valve (10).
4.
Install engine oil relief valve (10) on engine.
5.
Install bolt (12) on engine oil relief valve (10) and
14,15
4
12
9 13
engine block (13).
6
3
1
6.
Install two bolts (9) to engine oil relief valve (10)
and engine oil pump (11).
7.
Install new gasket (8), suction pipe (5) and strainer
(4) on roller.
8.
Install bolt (6) on oil pump support bracket (7).
9.
Install two bolts (3) on strainer (4) and suction pipe
(5).
10.
Install No. 1 main bearing cap (2) and two bolts (1)
on engine block (13). Tighten bolts to 195 lb-ft (264
401-2108
Nm).
8
7
2
11
5
10
11.
Install oil pan (WP 0020 00) on engine block (13).
12.
Fill engine with oil (WP 0008 00 and WP 0009 00).
13.
Start engine and check for leaks and proper operation (TM 5-3895-379-10).
END OF WORK PACKAGE
0164 00-2
