TM 5-3895-379-23
HYDRAULIC OIL SAMPLING - CONTINUED
SAMPLING
1.
Run engine until hydraulic oil is warm, not hot.
2.
Remove hydraulic oil sampling valve drain cap (1) from hydraulic oil sampling valve (2).
3.
Place container with 1 qt (0.9 l) minimum capacity under hydraulic oil sampling valve (2).
4.
Turn and hold knurled knob (3) in direction of arrow until hydraulic oil sample is collected. Release knob when sample
has been collected.
5.
Install hydraulic oil sampling valve drain cap (1) on hydraulic oil sampling valve (2).
OPEN
2
1
3
401-754
6.
Turn engine off.
7.
Submit hydraulic oil sample to your Army Oil Analysis Program (AOAP) laboratory for analysis.
8.
Close left-side door assembly (TM 5-3895-379-10).
9.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0142 00-2
