TM 5-3895-379-23
HYDRAULIC FILTER ASSEMBLY REPLACEMENT - CONTINUED
0144 00
REMOVAL - CONTINUED
4.
Loosen nut (6) and remove hose assembly (7) and O-ring (5) from hydraulic oil filter assembly (1). Discard O-ring.
5.
Loosen nut (8) and remove hose assembly (9) and preformed packing (10) from elbow (11). Discard preformed packing.
6.
Remove elbow (11) and O-ring (5) from hydraulic oil filter assembly (1). Discard O-ring.
7.
Remove four screws (12), washers (13) and hydraulic oil filter assembly (1) from frame assembly (14).
7
14
12
13
9
8
10
6
5
11
5
1
401-745
INSTALLATION
1.
Install hydraulic oil filter assembly (1) on frame assembly (14) with four washers (13) and screws (12).
2.
Apply sealing compound to threads of elbow (11) and install new O-ring (5) and elbow on hydraulic oil filter assembly
(1).
3.
Apply sealing compound to threads of hose assembly (9) and install new preformed packing (10) and hose assem-
bly on elbow (11). Tighten nut (8).
4.
Apply sealing compound to threads of hose assembly (7) and install new O-ring (5) and hose assembly on hydraulic oil
filter assembly (1). Tighten nut (6).
5.
Apply sealing compound to threads of hose assembly (4) and install new O-ring (5) and hose assembly on hydraulic oil
filter assembly (1). Tighten nut (3).
6.
Apply a light coating of hydraulic oil on the filter gasket (15).
CAUTION
Do not overtighten filter on hydraulic oil filter assembly. Failure to follow this caution may cause damage to
filter.
7.
Install hydraulic oil filter (2) on hydraulic oil filter assembly (1). Tighten filter 3/4 of a turn after filter makes contact
with filter base.
0144 00-3
