TM 5-3895-379-23
DECONTAMINATION KIT BRACKET REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Engine off (TM 5-3895-379-10)
Tool kit, general mechanic's (Item 36, WP 0220 00)
Drums chocked (TM 5-3895-379-10)
Shop equipment, common no. 1 (Item 28, WP 0220
Decontamination kit removed
References
TM 3895-379-23P, Figure 96
REMOVAL
9
1
1.
Remove strap (1) from bracket (2).
WARNING
Use caution when handling heavy parts.
Provide adequate support and use assis-
tance during procedure. Failure to follow
this warning may cause injury.
NOTE
2
8
7
3
4
5
6
Plate with decontamination kit bracket
attached weighs 22 lb (10 kg).
2.
Remove four screws (3), washers (4) and plate (5)
from bumper assembly (6).
3.
Remove four screws (7), washers (8), nuts (9) and
bracket (2) from plate (5).
INSTALLATION
1.
Install bracket (2), four washers (8), screws (7) and
nuts (9) on plate (5). Tighten nuts to 15-25 lb-ft (20-34
Nm).
2.
Install plate (5) on bumper assembly (6) with four
screws (3) and washers (4). Tighten screws to 15-25
lb-ft (20-34 Nm).
3.
Install strap (1) in bracket (2).
4.
Install decontamination kit.
5.
Remove chocks (TM 5-3895-379-10).
6
401-734
END OF WORK PACKAGE
