TM 5-3895-379-23
OPERATOR PLATFORM MOUNT REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
References
TM 5-3895-379-23P, Figure 101
Tool kit, general mechanic's (Item 36, WP 0220 00)
Equipment Condition
Shop equipment, common no. 1 (Item 28, WP 0220
Operator platform assembly raised (WP 0128 00)
REMOVAL
NOTE
Operator platform mounts are replaced the same way. One mount is shown.
Remove two nuts (1), washers (2), mount (3), two screws (4) and washers (2) from operator platform (5).
4
2
3
2
1
5
401-730
INSTALLATION
1.
Install mount (3) on operator platform (5) with two washers (2), screws (4), washers (2) and nuts (1). Tighten nuts to 30-
35 lb-ft (41-47 Nm).
2.
Lower operator platform assembly (WP 0128 00).
END OF WORK PACKAGE
