TM 5-3895-379-23
SEAT ASSEMBLY REPAIR - CONTINUED
0133 00
ASSEMBLY
1.
Install seat adjuster (15) on seat suspension (20) with four new locknuts (19).
2.
Install two seat assembly bars (18) on seat shell (3) with four washers (17) and capscrews (16).
NOTE
Seat assembly must be moved to full forward or full rear position to install screws and nuts holding seat sup-
ports to adjuster assembly.
3.
Install seat shell (3) on seat adjuster (15) with four screws (14) and nuts (13).
4.
Position seat cushion (12) and backrest cushion (11) in seat shell (3).
NOTE
Seat cushion material must be wrapped around seat shell for proper installation.
5.
Secure seat cushion (12) and backrest cushion (11) in seat shell (3) using trim (10) and clip (9).
6.
Install right arm assembly (8) on seat shell (3) with three screws (16).
7.
Install left arm assembly (7) on seat shell (3) with three screws (16).
8.
Install literature holder (5) on seat shell (3) with six
3
fasteners (4).
9.
Install lanyard (2) on seat shell new rivet (1).
5
4
2
1
401-696
10.
If removed, install seat assembly (WP 0132 00).
11.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0133 00-3/(0133 00-4 Blank)
