TM 5-3895-379-23
RAISE/LOWER OPERATOR PLATFORM ASSEMBLY - CONTINUED
0128 00
RAISE PLATFORM - CONTINUED
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
CAUTION
Operate wire rope hoists evenly to decrease chance of equipment failure.
7.
With assistance, use wire rope hoists to lift operator platform assembly (9) until operator platform mount clears bolt path
in frame assembly.
8.
Install two screws (12), washers (11) and new locknuts (10) in platform locking hole frame assembly (13) and operator
platform assembly (9). Tighten locknuts to 48-55 lb-ft (65-75 Nm).
0128 00-4