TM 5-3895-379-23
DOOR ASSEMBLY MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Disassembly, Assembly, Installation
INITIAL SETUP
Personnel Required
Tools and Special Tools
Two
Shop equipment, common no. 1 (Item 28, WP 0220
Equipment Condition
Engine off (TM 5-3895-379-10)
Lifting device, minimum capacity 100 lb (45 kg)
Drums chocked (TM 5-3895-379-10)
References
TM 5-3895-379-23P, Figure 100
NOTE
Right- and left-side door assemblies are
LIFTING
replaced the same way except where
DEVICE
noted. Right-side door assembly is shown.
REMOVAL
1.
Open right-side door assembly (1) (TM 5-3895-379-
10).
1
WARNING
Use caution when handling heavy parts.
4
3
2
Provide adequate support and use assis-
tance during procedure. Ensure that any
lifting device used is in good condition
and of suitable load capacity. Keep clear of
heavy parts supported only by lifting
device. Failure to follow this warning may
cause injury or death.
1
NOTE
Door assemblies weigh 100 lb (45 kg)
each.
2.
Attach lifting device to door assembly (1).
401-681
3.
Starting at bottom bolt and moving up, remove five
bolts (2), washers (3) and door assembly (1) from
frame assembly (4).