TM 5-3895-379-23
DOOR ASSEMBLY MAINTENANCE - CONTINUED
0123 00
DISASSEMBLY - CONTINUED
4.
If damaged, remove four bolts (27), washers (28),
30
two guides (29) and latch assembly (30) from door
assembly (1).
1
29
28
27
29
401-673
ASSEMBLY
1.
If removed, install latch assembly (30) and two guides (29) on door assembly (1) with four bolts (27) and washers
(28). Tighten bolts to 15-25 lb-ft (20-34 Nm).
2.
If removed, install lock (26) on door assembly (1) with screw (24), bolt (23), two washers (25) and new locknuts
(22). Tighten locknuts to 15-25 lb-ft (20-34 Nm).
3.
If removed, install lanyard (20) on door assembly
19
1
20
(1) with washer (21), bolt (19) and new locknut
18
(18). Tighten nut to 7-11 lb-ft (9-15 Nm).
21
4.
If door assembly (1) was repaired while installed on
components roller, close door assembly.
5.
If door assembly (1) was removed for repair, install
door assembly. Refer to Installation in this work pack-
age.
401-689
0123 00-4
