TM 5-3895-379-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 2. Electrical Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WARNING
Remove all jewelry such as rings, dog tags and bracelets. If jewelry
contacts electrical connection, a direct short may occur resulting in
injury or death and damage to equipment.
1. Check for broken lamps. Remove 1. If lamps are damaged, replace
5.
Warning and Indicator Lights Do
Not Operate.
two shoulder screws, washers and
lamps with new parts and turn
vandal guard from box assembly.
lamp assembly caps to left. Install
Remove three screws and
box assembly on operator station
washers and lift box assembly up
with three washers and screws.
from operator station. Turn lamp
Install vandal guard on box
assembly caps clockwise and
assembly with two washers and
remove lamps. Check lamps for
shoulder screws.
damage such as broken filaments
or smoky condition.
2. If lamps are not damaged, go to
Step 2.
FUNCTIONAL INDICATOR
LIGHT ASSEMBLY
VANDAL
TERMINAL ORDER
GUARD
FEDCBA
WASHER
SHOULDER
LAMP
SCREW
WARNING
WASHER
CAP
LIGHTS
WIRE
ASSEMBLY
123-WH
SCREW
401-199