TM 5-3895-379-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 2. Electrical Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2.
Starter Does Not Turn or Turns
Remove all jewelry such as rings, dog tags and bracelets. If jewelry
Slowly.
contacts electrical connection, a direct short may occur resulting in
injury or death and damage to equipment.
When working on a running engine, provide shielding for exposed
rotating parts. Tools, clothing or hands can get caught and cause
injury to personnel.
Never lay under roller when engine is running or while attempting
to start engine. Roller may accidentally move forward or back and
cause injury or death from crushing.
CAUTION
Operating starter for more than 30 seconds at a time can cause
starter damage due to heat buildup. After 30 seconds, starter must be
stopped for 2 minutes to allow starter to cool.
STARTER SOLENOID
SOLENOID TERMINAL
STARTER TERMINAL MOTOR
STARTER
VIEW LOOKING UP
BATTERY TERMINAL
FROM UNDER ROLLER
401-195
