TM 5-3895-379-23-1
0130
REMOVAL
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near
fire, flames, or sparks. Fuel may ignite, causing injury or death, or damage to machine.
Fuel is very slippery. Immediately wipe up any spills. Failure to follow this warning may
cause injury.
1.
Disconnect wire (Figure 1, Item 1) from cold start heater connector (Figure 1, Item 2).
1
2
M0583SWR
Figure 1. Cold Start Heater Removal.
CAUTION
Cap fuel line to prevent foreign material from entering lines to prevent damage to equipment.
NOTE
Inspect all hoses, lines, and fittings for cracks, bends, breaks, nicks, dents, stripped threads,
and cuts. Replace all damaged parts.
2.
Loosen nut (Figure 2, Item 5) and remove fuel line (Figure 2, Item 1) from cold start heater nipple
(Figure 2, Item 4).
3.
Remove cold start heater (Figure 2, Item 3) from intake manifold elbow (Figure 2, Item 2).
03/15/2011Rel(1.8)root(maintwp)wpno(M00068)