TM 5-3895-379-23-1
0129
FUEL/WATER SEPARATOR ASSEMBLY ASSEMBLY - Continued
6.
Remove fuel/water separator head (Figure 13, Item 7) from soft-jawed vise.
7.
Apply fuel on seal (Figure 13, Item 6) and install on fuel/water separator head (Figure 13, Item 7).
8.
Install fuel/water separator element (Figure 13, Item 5) on fuel/water separator head (Figure 13, Item 7).
9.
Install ring (Figure 13, Item 4) on fuel/water separator head (Figure 13, Item 7).
10.
Apply fuel on preformed packing (Figure 13, Item 1) and install on screw (Figure 13, Item 3).
11.
Install screw (Figure 13, Item 3) through water separator bowl (Figure 13, Item 9).
12.
Apply fuel on preformed packing (Figure 13, Item 8) and install on water separator bowl (Figure 13, Item 9).
CAUTION
Area around filter must be very clean. Any contaminant entering filter element or filter
assembly will damage equipment.
13.
Install water separator bowl (Figure 13, Item 9) on fuel/water separator element (Figure 13, Item 5).
14.
Install new preformed packing (Figure 13, Item 1) on drain valve (Figure 13, Item 2).
15.
Install drain valve (Figure 13, Item 2) on water separator bowl (Figure 13, Item 9). Tighten securely.
2
1
9
3
8
1
7
4
5
6
M0578SWR
Figure 13.
Fuel/Water Separator Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00067)
