TM 5-3895-379-23-1
0129
FUEL/WATER SEPARATOR ASSEMBLY ASSEMBLY - Continued
16.
Install plug (Figure 14, Item 3) in fuel/water separator head (Figure 14, Item 1).
17.
Apply fuel on preformed packing (Figure 14, Item 4).
18.
Install new preformed packing (Figure 14, Item 4), cap (Figure 14, Item 5), and nut (Figure 14, Item 6) on
fuel/water separator head (Figure 14, Item 1). Tighten nut securely.
19.
Remove fuel/water separator assembly (Figure 14, Item 2) from work bench.
1
2
3
4
5
M0579SWR
6
Figure 14.
Fuel/Water Separator Assembly.
END OF TASK
FUEL/WATER SEPARATOR ASSEMBLY INSTALLATION
1.
Install fuel/water separator assembly (Figure 15, Item 5) on support (Figure 15, Item 1) with two washers
(Figure 15, Item 3), screw (Figure 15, Item 4), and nuts (Figure 15, Item 2). Tighten screws to 25 lb-ft (34 Nm).
1
2
5
4
3
M0580SWR
Figure 15. Fuel/Water Separator Assembly Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00067)