TM 5-3895-379-23-1
0103
REMOVAL
WARNING
Oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause
injury.
1.
Remove oil filter (WP 0077).
2.
Remove two bolts (Figure 1, Item 3), two bolts (Figure 1, Item 4), oil filter head assembly (Figure 1, Item 5),
gasket (Figure 1, Item 1), access cover (Figure 1, Item 2), and gasket (Figure 1, Item 1). Discard gaskets.
1
2
1
3
5
4
M0125SWR
Figure 1. Oil Filter Head Assembly Removal.
END OF TASK
CLEANING
WARNING
Cleaning compound, solvent MIL-PRF-680 Type III is an environmentally compliant and low
toxic material. However, it may be irritating to the eyes and skin. The use of protective gloves
and goggles is suggested. Use in well-ventilated areas. Keep away from open flames and
other sources of ignition.
1.
Remove any original gasket material from oil filter head assembly.
2.
Clean all surfaces with cleaning compound, solvent.
03/15/2011Rel(1.8)root(maintwp)wpno(M00042)