TM 5-3895-379-23-1
0101
INSTALLATION
NOTE
If installing the breather tube only, go to Step (4).
Grooved side of gasket must face cylinder head.
1.
For CB534B Roller, position three tabs (Figure 4, Item 5) of new gasket (Figure 4, Item 7) into three notches
in valve cover (Figure 4, Item 1).
2.
For CB534C Roller, position new gasket (Figure 4, Item 7) in valve cover (Figure 4, Item 1).
CAUTION
Do not overtighten valve cover nuts. Failure to follow this caution may cause rocker bracket
nuts being overtightened.
NOTE
Lubricate seals with clean engine oil prior to installation.
3.
Install valve cover (Figure 4, Item 1) and gasket (Figure 4, Item 7) on cylinder head (Figure 4, Item 6) with
three seals (Figure 4, Item 2) if damaged, washers (Figure 4, Item 4), and nuts (Figure 4, Item 3). Tighten nuts
to 22 lb-ft (30 Nm).
3
4
1
2
7
6
CB534B
5
ROLLER
M0121SWR
Figure 4. Valve Cover and Breather Tube Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00040)
