TM 5-3895-379-23-1
0101
REMOVAL
WARNING
Use caution and allow engine to cool before removal of component. Failure to follow this
warning may cause injury.
NOTE
Valve cover and breather tube are replaced the same way for CB534B and CB534C
Rollers except where noted. CB534B Roller is shown.
If removing breather tube only, go to Step (3).
1.
For CB534B Roller, remove locknut (Figure 1, Item 15), washer (Figure 1, Item 2), washer (Figure 1, Item 3),
bolt (Figure 1, Item 1), washer (Figure 1, Item 2), and washer (Figure 1, Item 3) from radiator bracket
(Figure 1, Item 4) and engine lifting bracket (Figure 1, Item 5). Discard locknut.
2.
Remove three screws (Figure 1, Item 13), washers (Figure 1, Item 14), clip (Figure 1, Item 12), and engine
lifting bracket (Figure 1, Item 5) from cylinder head (Figure 1, Item 6).
3.
For CB534C Roller, remove two bolts (Figure 1, Item 11) and engine lifting bracket (Figure 1, Item 7).
4.
Loosen hose clamp (Figure 1, Item 9) and remove breather tube (Figure 1, Item 10) from valve cover connector
(Figure 1, Item 8).
1
2
6
3
7
4
5
6
3
2
15
8
8
9
14
13
9
10
11
10
12
M0118SWR
Figure 1. Valve Cover and Breather Tube Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00040)
