TM 5-3895-379-23-1
0101
REMOVAL - Continued
NOTE
When performing Step (7), ensure that the rocker bracket nuts are not loosened. Check rocker
bracket nuts for tightness each time valve cover is removed.
7.
Remove three bolts (Figure 3, Item 3), washers (Figure 3, Item 4), and seals (Figure 3, Item 2) from valve cover
(Figure 3, Item 1). Inspect and replace seals if damaged.
CAUTION
Use care that contaminants do not enter valves when cover is removed. Failure to follow this
caution may cause damage to equipment.
8.
Remove valve cover (Figure 3, Item 1) and gasket (Figure 3, Item 6) from cylinder head (Figure 3, Item 5).
Discard gasket.
3
4
2
1
6
5
CB534B
ROLLER
M0120SWR
Figure 3. Valve Cover and Breather Tube Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00040)
