SECTION 8
FINAL DRIVE
f.
Place the planetary anchor flange on a
the pinion gear (see figure 8-23).
protective surface with the oil breather side up. Press the
bearing into the flange and install the snap ring. Press
e.
Align the gear, thrust washer and planetary
the oil seal into the flange until the seal bottoms on the
carrier and insert the riding pin. Install the spacer,
shoulder provided (see figure 8-25). Install dust protector
lockplate and capscrew. Rotate the planetary pinion gear
onto anchor flange and tighten dust protector mounting
to insure proper seating of the bearings and thrust washer.
bolts.
Torque the capscrew per specification, back off one flat
and lock. Then install the other two pinion gears in the
g. Assembly of drive drum hub. Press the bearing into
same manner (see figure 8-24).
the drum hub (see figure 8-26).
FIGURE 8-23.
FIGURE 8-21.
FIGURE 8-24.
FIGURE 8-22.
8-8.
