TM 5-3895-383-24
Drum Gear Reducer (CS-563D
& CS-563D)
Remove Install Drum Gear
Reducer CS-533D, CP-533D, CS-563D,
CP-563D) 5655-010
Tools Needed
A
138-7574
Link Bracket
1
6V-2082
Hook Assembly
1
Start By:
a.
remove drum
CS-563D
CS-563D
1.
Drain the oil from the drum gear reducer into a suitable
container. The capacity of the drum gear reducer is 12
liters (3.12 U.S. gal).
2.
Attach Tooling (A) and a hoist to plate (1) as shown.
3.
Remove the bolts that fasten plate (1) to the isolation
mounts. Remove the drum gear reducer and plate as a
unit from the drum assembly. The weight of the plate
and drum gear reducer as a unit is 180 kg (396 lb).
NOTE:
The CP-533 and CP-563D will have eight bolts that
fasten plate (1) to the isolation mounts. The
CS-533 and CS-563 will have six blots that fasten
plate (1) to the isolation mounts.
4.
Remove two bolts (4), and remove drum propel motor
(3) from drum gear reducer (2).
5.
Remove ten bolts (5), and use a hoist and lifting straps
to remove plate (6) from drum gear reducer (2). The
weight of the plate is 58 kg (128 lb).
14-92
