TM 5-3895-383-24
21.
Carefully remove cradle assembly (37) from the
housing.
22.
Disassemble cradle assembly (37) as follows:
a.
Remove wire (42) and bearing (43) from cradle (38).
b.
Remove pin joint (39), slide (40), bearing (41) and
wire (44) from cradle (38).
23.
Remove bearing races (45) from the housing.
24.
If necessary, remove pins (46) from the housing.
25.
Remove five screws (48), and remove control valve (47)
and the gasket from the housing. Check the gasket for
wear or damage and replace if necessary.
14-31
