TM 5-3895-383-24
26.
Loosen the jam nut, and remove limiting screw (50) from
cover (49). Loosen the jam nut on the opposite side of
the housing, and remove the remaining limiting screw
from the housing.
27.
Remove four bolts (51), and remove cover (49) from the
housing. Remove the O-ring seal from the cover.
Check the O-ring seal for wear or damage and replace if
necessary.
28.
Remove nut (52) and remove stroking piston (53) from
the cover.
29.
Remove retaining ring (57), bushing (56) and retaining
ring (59) from housing (11). Remove O-ring seal (60)
from bushing (56). Check the O-ring seal for damage or
wear and replace if necessary.
30.
Remove retaining ring (55) and bushing (54) from
housing (11). Remove O-ring seal (58) from bushing
(54). Check the O-ring seal for damage or wear and
replace if necessary.
31.
Remove retaining ring (61) and remove seal (62) from
housing (11).
14-32