TM 5-3895-383-24
(1)
Ground terminal. Tighten to a
torque of ...............................26 3.5 Nm (230 31 lb-in)
(2)
Motor terminal. Tighten terminal to a
torque of...................................25 7 Nm (221 62 lb-in)
(3)
Battery terminal. Three cables or wire terminal
maximum between nuts. Two cable terminals
maximum with 0 AWG or larger. Tighten nut to a
torque of................................26 3.5 Nm (230 31 lb-in)
(4)
Switch terminal. Tighten to a
torque of ..............................2.25 0.25 Nm (20 2 lb-in)
Solenoid:
Current consumption (draw):
Pull-in current at 24 V .....................................................50 A
Hold-in current at 24 V....................................................20 A
3E5382
111-9860
Rotation as seen from drive end.................................... Clockwise
No load conditions at 25C (77F):
Speed (min)............................................................ 4200 rpm
Current (max) ................................................................ 220 A
Voltage ..............................................................................12 V
(1)
Ground terminal. Tighten to a
torque of................................26 3.5 Nm (230 31 lb-in)
(2)
Motor terminal. Tighten terminal to a
torque of ..................................25 7 Nm (221 62 lb-in)
(3)
Battery terminal. Three cables or wire terminal
maximum between nuts. Two cable terminals
maximum with 0 AWG or larger. Tighten nut to
a torque of ...........................26 3.5 Nm (230 31 lb-in)
(4)
Switch terminal. Tighten to a
torque of ..............................2.25 0.25 Nm (20 2 lb-in)
Current consumption (draw):
Pull-in current at 12 V .....................................................90 A
Hold-in current at 12 V ...................................................30 A
Solenoid:
Current consumption (draw):
Pull-in current at 12 V .....................................................90 A
Hold-in current at 12 V ...................................................30 A
7-22
