TM 5-3895-383-24
8C5510 Alternator (12V 60A)
NOTE:
Load battery with a carbon pile (4C4911 Battery
Load Tester) to get maximum alternator output.
Polarity ...................................................................Negative Ground
Rotation .................................. Clockwise (as viewed from pulley)
Turn on speed at 25C (77F) (maximum) ................... 2000 rpm
Output voltage at 25C (77F)..................................... 14.7 0.5 V
Rated output (cold) at 5000 rpm (minimum) ..........................56 A
Rated output (cold) at 2000 rpm (minimum) ..........................35 A
(1)
Pulley nut. Tighten nut to a
torque of ..................................... 102 7 Nm (75 5 lb-ft)
(2)
Output (+) terminal. Tighten nut to a
torque of ..................................3.6 0.8 Nm (32 7 lb-in)
100-5045 Alternator (24V 50A)
NOTE:
Load battery with a carbon pile (4C4911 Battery
Load Tester) to get maximum alternator output.
Polarity ...................................................................Negative Ground
Rotation ....................................................................Either Direction
Turn on speed at 25C (77F) (maximum) ................... 2000 rpm
Output voltage at 25C (77F) ...........................................28 1 V
Rated output (cold) at 5000 rpm (minimum) ...................... 44.6 A
Rated output (cold) at 1500 rpm (minimum)....................... 16.5 A
(1)
Pulley nut. Tighten nut to a
torque of...................................... 102 7 Nm (75 5 lb-ft)
(2)
Output (+) terminal. Tighten nut to a
torque of.........................13.5 1.3 Nm (120 11.5 lb-in)
(3)
Negative (-) terminal. Tighten nut to a
torque of ..................................4.4 ± 1.0 N m (39 9 lb-in)
(4)
Regulator.
Voltage setting ............................................. No Adjustment
Permissible voltage range ...................................27 to 29 V
7-19
